Technical parameters:Introduction
XK3201T1 is a multipurpose weighing indicator, which is suitable for platform scale, weighbridge, volume scale, truck scale, and crane scale.
Adopt the 21st century's latest Delta - sigma chip, to achieve high precision and speed conversion. It adds many new software functions based on XK3201T, such as four standard light-coupler input, KG/IB unit converting, peak/valley unit holding, delay switch for high and low limit.
Main Features :
1,Adpot clear and stable LED
2,Can independently adjust zero and full range
3,A/D conversion rate is 120 times /s
4,Can drive 6pcs sensors of 400ohm
5,display update rate can choose to 1,4,8,16 or 20 times/s
6,Automatic repayable reset circuit
7,Standard high/low limit compare output port.
8,can choose single material batching software
9,All digital calibration and function setting mode
10,,With external switch protection for calibration and function setting
11,can choose back zero range
12,Tracking and hold A/D conversion mode
13,Can control analog keys by RS232 or RS485
14,Provide digital filtering for various environments
15,Can choose kg or tons
16,standby 4~20mA analog output port Performance indexAnalog signals section
| Sensor voltage | DC10V(plus-minus 0.05% ) |
| Sensor current | 120mA(Up to four 350ohm load cells can be connected in parallel) |
| Sensor wire | standard 4-wire or 6-wire |
| Analog signal input sensitivity | 0.3uV/count |
| Accuracy | Zero drift<0.1uV(compare with input)Gain drift :10ppm |
| Zero adjustment range | 0.0~about 2.0mV/( digital adjustment) |
| Amplify adjustment range | 0.3~about 2.0mV/V(digital adjustment) |
| Non-linearity | 0.01%FS within |
| Conversion rate | 120 times/sec |
| Resolution | 24 bits |
| Min indication resolution | 1/10000,1/40000(highest-level) |
Display section
| Display tube | LED |
| Digital display | 6 bits,18mm height; |
| Weight display | 5 bits |
| Unit | g,kg,t option |
| Decimal point | 0, 0.0, 0.00, 0.000, 0.0000 option |
| Max weight | 5 bit (50000) |
| End bit min resolution | 1,2,5 option |
General Specification
| Power input | AC220V(+10%~-15%)50/60HZ |
| Power consume | about 10W |
| Operation temperature | -20 ~+50 |
| Storage temperature | -40 ~+80 |
| Humidity | <80%RH(non-condensing) |
| Volume | 96W*48H*140D mm |
| Cut-out size | 92W*46H mm |
| Weight | about 0.6kg. |
Weighing Indicator
Click image to view full size image
